Electric pasteuriser with heating coil and tube heat exchanger, productivity from 100 l/h up to 180 l/h. Available models with 1 (9kW model) or 2 bottle fillers (18 kW model). Bag-in-Box filler is also available for 18 kW model.
Price starting from 3080€ (without VAT)
/ 9kW / 16A
/ 18kW / 32A
The PA180E is a practical combination
of a pasteurising device and filler,
optionally available for bottle or
bag-in-box filling. The system
consists of an electrically heated
water tank, through which the
juice to be pasteurised flows from
top to bottom through a tubular
spiral while being preserved by
heating. The raw juice tank is located
above the water tank.
PA180E has a straightforward operation thanks to manual flow control and digital display for supervising temperature. Using the 2-bottle filling system allows different sizes of bottle to be filled at the same time. This pasteuriser is also available with a filling system for Bag in Box.
Made of stainless steel
Comes in the set with 1 (9kW model) or 2 bottle fillers (18 kW model)
Bag-in-Box filler is also available for 18 kW model
Bottle filling: The pasteurisation temperature is
controlled by using a ball valve to regulate the flow
rate. The filling is started and stopped by self-actuating
valves when the bottles are placed and removed.
Bottles with inner diameters of 17mm to 20mm can be
filled as a standard, with an optional plate available for
wide-neck bottles with up to 50mm outside diameter.
Filling Bag-in-Boxes: The pasteurisation temperature
is controlled by using the first ball valve to regulate the
flow. The second ball valve is used to start and stop the
filling process. The tap can be removed by a bracket, which
holds the tap during the filling process and helps to close
the bag easily.
A scale can be placed under the device to ensure precise