Classic juice press with strong construction has 18-litre basket and 2T hydraulic jack. All parts of the press that come in contact with the juice are made of stainless steel.
A smaller but very handy and robust press has a 18-litre basket and 2T hydraulic jack with lifting capacity of 2000 kg placed below the basket. Its advantage lies in its excellent handling when pressing, it is unnecessary to remove the jack. Pressing takes place in three steps. To adjust steps while pressing use the upper stainless steel pushing bar that has three openings. Start pressing process by setting the press in the lowest opening. After pressing adjust the press to the higher opening and repeat the process. Finish the pressing process while the press is set in the highest opening- this sets the pressing capacity of the jack to the maximum. Pressing is easy and fast.
The basket volume of 18 l corresponds to the contents of one vessel of the Fruit Shark shredder. The pressing basket is made of 3mm thick stainless steel and the pressing plate is 6mm stainless steel.
In order to maintain maximum cleanliness of the fruit juice and accelerate and facilitate handling when loading and unloading the press contents, we recommend using a filter bag inside of the press. It is unnecessary to filter the fruit juice afterwards.
